15 Reasons Why You Shouldn t Be Ignoring Bmw Ghost Immobiliser
Protect Your Vehicle With a Ghost Immobiliser
With more and more pride and joy being poured into our cars, it only makes sense to secure them. The autowatch ghost 2 immobiliser Ghost is a discreet vehicle immobiliser that connects to your vehicles CAN data network. It works through the ECU (your cars brain).
Once it is installed the device will stop your car from moving unless the pin code sequence you choose (up to 20 presses) is entered, just like a PIN on your credit card.
No Key Fobs or LED Indicators to Give Away Its Location
The Ghost Immobiliser is virtually invisible to anyone who enters your vehicle since it doesn't use LED indicators or key fobs. The system makes use of buttons that are already in use, such as the centre console or the steering wheel to create an unique, programmable pin code sequence that must be entered before your car will start. The system can be configured to require as many as 20 presses before the engine will start making it nearly impossible for thieves or cloners to gain access into your vehicle.
Modern car thieves employ professional diagnostic tools to determine what security systems are in place on vehicles. The Ghost immobiliser Fitting Birmingham however, does not send any signals. Criminals can identify the kind of security device installed in your car using sophisticated RF scanning technology such as code grabbing, relay and attack methods. This will allow them to tamper with the alarm or immobiliser circuits to disable your system and get away with your vehicle.
The Ghost is different from other immobilisers that are available on the market as it is integrated directly into the CAN data network of your car or van which makes it virtually impossible to bypass. The system is compatible with modern cars that don't have key fob security. It can also be used in all electric vehicles and will even stop the vehicle from going into "service valet mode".
After installation by our fully trained engineers, TASSA will verify the installation to ensure that it is secure and up to standards. TASSA is an organisation which maintains and improves standards within the automotive security industry and ensures that all their certified installers have been through DBS checks and are certified, insured and trained to install the Ghost. They will also provide you with your owner manuals, Installation certification and an emergency card for Ghost. This will also make your car qualified for a substantial reduction in the cost of insurance. This is because your car is less likely to be stolen and it will be much simpler for your insurers to recover.
No Circuit Cuts
The Ghost is the original aftermarket immobiliser for CAN buses that safeguards your vehicle in a way that is unlike anything else available. It's not linked to LED indicators or key fobs, however, it communicates directly with the vehicle's CAN system. It then blocks the ECU and prevent the engine from running until a specific PIN has been entered into the steering wheel or dash buttons (brand dependent). This means that it is impossible for criminals to hack into the system using relay attacks or any other method and can't simply be disabled by the buttons a few times like with older systems.
The system comes with an Service and Valet mode that is activated while the vehicle is in garage for servicing or valet parking. This allows the vehicle how to fit a ghost immobiliser begin while it is being repaired without having to give keys or enter the pin code. It then it automatically turns off after the vehicle is in your possession.
The Ghost is a safer choice for classic, sports and luxury automobiles that must be kept away from the battery while parked for extended periods of time. It is also undetectable by the latest technology for RF scanning and code grabbing, making it very difficult for hackers or thieves to bypass.
If you are looking for a complete solution of vehicle security that will not only protect against key-cloning and monitor your vehicle if it is stolen, then we recommend one of our S7 tracking systems. They integrate seamlessly with Ghost to provide peace of peace of. All installations are completed by an approved installer from TASSA who is fully certified, insured and experienced. You will also receive a Ghost emergency card, owner manuals and Installation certification.
Contact us to receive a quote and book if you are interested in having a Ghost installed on your vehicle. Booking in advance is usually more efficient than waiting until last minute, when we're extremely busy. We'll always aim to get you booked as soon as possible.
No Scanning RF
Many thieves use sophisticated equipment to clone car keys and steal vehicles. These systems can be accessible on the internet and require only a few basic skills to operate. These cloning devices do not employ RF scanning to locate the Ghost immobiliser.
Instead, the system uses the buttons in your car to create a unique pin code push sequence. This is accomplished by using the buttons that are already on your steering wheel, door panels or central console. It is also reversible and does not have a PIN number like the remote key fob, which makes it extremely difficult to hack.
This makes the Autowatch Ghost very secure and extremely easy to use. It doesn't require the use of a smartphone, but it can be utilized with a small waterproof tag or an Apple or Android App (sold separately). You can simply switch into service mode with your mobile device, then drive away and then return the vehicle to valet mode & disable your phone. This is ideal for classic cars and prestige cars that are often serviced by garages of dealers.
These CANBUS immobilisers can be connected to other security products such as alarms and trackers (Brand dependent). This lets the user decide whether or not they would like their alarm or tracker to have priority over CAN bus immobilisers. This is especially useful in the event you have a Thatcham approved Tracker fitted as the tracker can be armed before the Ghost is activated.
The CANBUS immobilisers utilize the cars CAN data bus to block the codes that would be sent to the ECU and BCM controllers using the remote keys that came with it which hinders them from starting the car or triggering the engine. These systems can also be used to add an extra layer of security for vehicles with remote controls from the factory (Brand dependent) and provide additional security for electric cars and those with keyless entry.
If you're looking for an upgrade in security for your BMW then the Autowatch Ghost is an ideal solution. It is completely hidden in the wiring making it almost impossible to see. It does not rely on any key-fobs or LED indicators which also helps to avoid the possibility of a criminal seeing its presence in your vehicle.
No Electronics to Detected
As a leading Thatcham installer, we install a brand new and innovative product by Autowatch called the Ghost Immobiliser that effectively stops Keyless Entry theft or cloning that is on the rise in modern vehicles. It is a covert system that doesn't use LED indicators or key fobs. It uses the factory buttons inside your car to create an individual pin code sequence that you can push. This is required to start or move the vehicle. The car cannot move or begin to start until this sequence is entered correctly. Numerous insurance companies now require this device to be installed as a standard and can result in a reduction in monthly cost.
It does not require the cutting of any wires to be put in place because it is connected to the CAN data bus and functions via the ECU (Engine Control Unit). The device cannot be detected using the kinds of diagnostic tools that thieves using high-tech use and there is no way they can listen for the distinctive click of a traditional relay like on a more conventional security device. The Ghost Immobiliser can also be programmed into the service mode, so that your vehicle can be driven and started without the need for a PIN code which is beneficial for when you take it to the garage, or for a valet parking service etc. The PIN code can be changed for additional security at any time.
The Ghost II is TASSA approved which means it is only available through fully certified installers. This gives you the highest level of protection and also ensures that the Engineer who installs it is DBS checked as well as insured and certified.
While it's not a substitute for an alarm system, we always recommend you to combine it with other physical barriers, such as crook locks and wheel clamps and, if you can, a hidden GPS tracker like Meta Trak VTS to give you the best level of protection available. This is especially important if you keep your keys in the ignition when it isn't being driven as there are a variety of methods that can be employed to trick the driver into thinking they are still inside the vehicle, allowing a theft to occur.
